聚乙烯格网阻风、消泡的研究与应用

当废水中有表面活性剂成分时,通常采用消泡剂消除好氧曝气池液面聚集的泡沫,但消泡效果差,同时会增加成本和污染物的量。试验发现超小尺寸格网具有阻风、割裂泡沫的功能,采用超小尺寸格网覆盖好氧曝气池池面,能够彻底解决泡沫乱飞的危害,每年可节省消泡剂费用70万元,人工成本20万元,生化出水CODCr的质量浓度比投加消泡剂时下降15～25 mg/L,而且易于管理。     

三相气升式环流反应器内上升区相含率轴向分布与循环液速的研究

常温常压下,在三相气升式内环流反应器中,将硅铝球、石英砂和瓷球分别与空气、水组成三相物系,考察了细颗粒与大颗粒物系中上升区相含率轴向分布规律、固体装载率和颗粒粒径对该规律的影响,以及各物系中上升区循环液速随表观气速的变化规律。结果表明:随轴向高度的增加,瓷球物系中上升区固含率εsr先增大后减小;硅铝球物系中εsr减小;石英砂物系中εsr均匀分布。随轴向高度的增加,瓷球物系中上升区气含率εgr增大;硅铝球物系中εgr减小;石英砂物系中εgr先增大后减小。固定表观气速,各轴向位置处的上升区气含率随固体装载率、颗粒粒径的增大而增大。当固体装载率相同时,各物系中上升区循环液速随表观气速的增大而增大。     

Effects of foaming and antifoaming agents on the performance of a wet flue gas desulfurization pilot plant

Foaming is a common phenomenon in industrial processes, including wet flue gas desulfurization (FGD) plants. A systemic investigation of the influence of two foaming agents, sodium dodecyl sulphate (SDS) and egg white albumin (protein), and two commercial antifoams on a wet FGD pilot plant operation has been carried out. Foaming caused by 0.03 g SDS/(L slurry) reduced the desulfurization degree from 84 to 74% and the solids and limestone concentrations of the slurry from 58 to 48 g/(L slurry) and from 1.4 to 1.0 g/(L slurry), respectively. These effects were attributed to the foaming transferring small particles to the foam layer present on top of the slurry in the holding tank. The addition of 0.03 g antifoams/(L slurry) to SDS foam eliminated the foam, but the desulfurization degree remained low. Potential mechanisms for the observed behavior are analyzed. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2382–2388, 2014     

横隔板增强型泡沫夹芯复合材料梁抗剪性能试验研究

复合材料泡沫夹芯结构易发生芯材剪切破坏,需对泡沫芯材进行增强。本文对比分析了不同增强泡沫夹芯结构的增强原理、芯材对界面性能和抗剪能力的贡献以及各自的局限;采用真空导入工艺制作了横隔板增强泡沫夹芯梁,并对其进行了剪跨比为3的三点弯试验,研究了横隔板及其间距对泡沫夹芯结构抗剪性能的影响。试验结果表明,横隔板的存在能有效提高构件的延性,且横隔板间距越小,延性越好,改善了泡沫夹芯结构脆性破坏的特性;但横隔板增强对夹芯梁强度和刚度的影响不大,该结果与垂直缝纫增强泡沫夹芯结构的试验结果类似。横隔板增强泡沫夹芯结构具有良好的设计性,其制作过程比较简单,可改变横隔板角度或采用双向隔板增强,从而在保持延性的优势下,提高其强度和刚度。     

PP/EPDM/滑石粉微孔发泡复合材料的制备和性能

通过微发泡注射成型方法制备PP/EPDM(三元乙丙橡胶)/滑石粉复合材料制品,并研究滑石粉的含量对PP/EPDM/滑石粉微孔发泡复合材料的微观形态和力学性能的影响。结果表明:添加适量滑石粉的PP/EPDM/滑石粉复合材料的发泡效果优于仅添加单一的EPDM的PP/EPDM复合材料的发泡效果,而且当PP/EPDM/滑石粉的质量比为79/21/4时,微孔制品的微观形态最好;且此比例的PP/EPDM/滑石粉微孔发泡制品与未添加滑石粉的PP/EPDM微孔发泡复合材料制品相比,其拉伸强度、弯曲强度、冲击强度分别提高了2%、6%、4%。     

泡沫炭及其复合材料

本文介绍了泡沫炭的主要性能和泡沫炭复合材料：泡沫炭作为一种新型的炭材料,受到了广泛的关注。它具有密度小、强度高、导电、导热、热稳定、化学稳定等良好的物理和化学性能。泡沫炭复合材料对相对泡沫炭来说力学性能有了一定的提高,其复合材料主要分为五类。本文分别介绍了不同增强相对泡沫炭性能的提升,并就泡沫炭的复合增强方面综述了近年来国内外对泡沫炭及其复合材料的最新研究进展,并指出了泡沫炭的未来研究方向。     

无卤阻燃聚氨酯泡沫塑料的性能研究

以多元醇、二异氰酸酯、聚磷酸铵(APP)、三聚氰胺(MA)等为原料,采用一步法,制得阻燃聚氨酯泡沫塑料。研究了不同阻燃剂的用量对聚氨酯泡沫的力学性能、热性能和阻燃性能的影响。结果表明,材料拉伸强度随阻燃剂添加量的增加而增加;材料的极限氧指数和在500℃时的分解残留量均随复合阻燃剂添加量的增加先增大后减小;APP/MA复合阻燃剂的效果好于单组分APP。     

高强度聚氨酯硬质泡沫制备技术的发展现状与展望

讨论了影响聚氨酯硬质泡沫塑料强度的重要因素,并介绍了聚氨酯硬质泡沫塑料的增强技术,重点综述了混杂增强和纳米增强的研究进展。     

可聚合有机强酸/硫酸复合固化剂及其酚醛泡沫

将苯酚在适当过量的浓硫酸中磺化得到粗产物直接配制成可聚合有机强酸(苯酚磺酸)/硫酸复合固化剂用于酚醛树脂发泡,测定了不同n(苯酚)∶n(硫酸)下苯酚的磺化率、分析了粗产物的组成;研究了不同n(苯酚)∶n(硫酸)得到的粗产物配制的复合固化剂对酚醛泡沫体pH值及其结构与性能的影响。结果表明,可聚合有机强酸/硫酸复合固化剂在催化固化反应的同时,参与固化反应,以化学键连接在酚醛树脂中,减少了对基材腐蚀。泡沫体在保证基本性能的前提下,其pH值达到5.4。     

Separation and determination of cadmium in water by foam column prior to inductively coupled plasma optical emission spectrometry

The sorption profile of cadmium (II) ions from aqueous iodide media onto procaine hydrochloride (PQ⁺·Cl⁻) treated polyurethane foams (PUFs) solid sorbent was studied. PQ⁺·Cl⁻ treated PUFs solid sorbent was found suitable and fast for Cd²⁺ uptake as [CdI4]_aq²⁻. Thus, removal of Cd²⁺ at trace levels by the sorbent packed columns was achieved. The sorbed Cd²⁺ species onto packed column were recovered with HNO₃ (10.0 mL, 1.0 mol L⁻¹) prior determination by inductively coupled plasma-optical emission spectrometry (ICP-OES). Plot of Cd²⁺ ions concentration was linear in the range 0.05–15 μg L⁻¹. The limits of detection and quantification of Cd²⁺ were found 0.01 μg L⁻¹ and 0.033 μg L⁻¹, respectively. Such limits could be improved to lower values by retention of Cd²⁺ species from large sample volumes of the aqueous phase at the optimized conditions. The relative standard deviation of the packed column for the extraction and recovery of standard aqueous solutions (0.1 L) containing 1.0 and 5.0 μg L⁻¹ (n = 3) of Cd²⁺ ions at flow rate of 5.0 mL min⁻¹ were 1.98 and 2.9%, respectively. The method was validated by analysis of Cd in certified reference materials (CRMs) IAEA-Soil-7 and TMDW water and wastewater samples.